Epoxy garage floor flake colors

Flake is what gives an epoxy garage floor its color, its pattern, and a little texture underfoot. Small vinyl chips are scattered over the base coat until they cover it, then sealed under a clear topcoat. The mix of colors in the blend decides how the floor looks up close and from across the garage. Our crews install Torginol flake across Waukesha County, and since it’s ordered for each job, any of the 105 blends below can go on your floor.

Selected blend

Domino

Chip size

  • Black: 33%
  • Granite: 33%
  • White: 33%

Kneeling, about 2 feet away, you see every chip. Standing, about 6 feet away, the chips start to blend. From the doorway, about 15 feet away, most floors read as one overall color. Colors on a screen are close but not exact, and garage lighting changes how a blend looks too.

Get an estimate with this blend

Select a color

Custom blends

Don’t see the mix you want? Midwest Painting Pros can create a custom blend from several Torginol chip colors, so your floor can pick up your siding, trim, or cabinet colors. Ask about it at your estimate.

Which flake chip size should I pick?

For most garage floors, 1/4-inch chips are the usual choice. Torginol blends come in 1/4 inch, 1/8 inch, and 1/16 inch chips, and the size changes the pattern up close and how soon a blend settles into one color as you step back.

1/4″ chips The classic flake look
1/8″ chips A finer, tighter pattern
1/16″ chips A fine, stone-like speckle
Flake chip sizes compared
Chip sizeUp closeFrom the doorwayOften chosen for
1/4″Each chip and color is easy to pick out.Reads as one overall color with some movement in it.Garage floors, shops, and basements
1/8″Accent chips show as small specks.Settles into one color sooner than 1/4″.Smaller rooms and floors where you want a calmer look
1/16″A fine speckle that reads more like stone than flake.Looks close to a solid color.Floors where you want an even, low-contrast look
Finished single-car garage in East Troy with a gray flake floor, seen from the doorway
This floor has navy chips in the mix, but from the doorway it reads as one even gray.

How do I choose a flake color for my garage?

Judge a blend from the doorway first, then think about dirt, light, and the house around it.

Your usual view
Most people see their garage floor from the car or the doorway. Judge a blend at that distance first, then check the close-up.
Dust and winter salt
Wisconsin winters bring salt and sand in on the tires. A busy blend with light and dark chips hides dust and dried salt between washes better than a solid-color floor. Rinsing and squeegeeing through winter still matters. See how to clean a coated floor.
Small or dim garages
Lighter gray and white blends keep a small garage or a basement from feeling dark.
Tie it to the house
Pick up the siding, trim, cabinet, or door color, or choose a neutral that won’t clash with anything.
Bold colors
A few blue, red, or green chips read as an accent. A blend that’s mostly one bright color is a lot louder, so look at it from the doorway before you decide.
The final pick
We work with homeowners on the final blend before the flake is ordered. If you’re still deciding on a coated floor at all, read the pros and cons of an epoxy garage floor.

You can choose any Torginol flake blend, because we order flake for each job instead of stocking a few colors.

All 105 blends on this page are available. Domino, Gravel, and Nightfall are gray mixes, Creekbed, Outback, and Shoreline are warmer beige and tan blends, and Tidal Wave and Orbit have blue chips in them.

1/4-inch chips are the most common size for garage floors.

They show each color clearly up close and read as one color from the doorway. Smaller 1/8-inch and 1/16-inch chips make a finer, more stone-like pattern. We offer all three sizes, and we bring flake samples to every floor estimate so you can compare them.

Our crews install Torginol vinyl flake.

Torginol makes the blends in this tool, and we order the blend you choose for your job. People call these epoxy floors, and the base coat is epoxy (polyurea when a customer asks for it), but the clear topcoat over the flake, the layer you walk on, is polyaspartic. Our epoxy vs polyaspartic guide explains how the layers differ.

Yes. Flake, epoxy floor chips, and color chips all mean the same vinyl pieces scattered over the base coat of a flake floor.

On a full-flake floor they cover the base coat edge to edge, then a clear topcoat seals them. That’s a different floor from garage floor paint with a few decorative flakes sprinkled on top.

Gray mixes of light and dark chips, like Torginol’s Domino and Gravel, are a common pick for garages.

They look clean from the doorway and go with most houses. Warmer tan and brown blends suit porches and houses with brick or wood tones.

A floor looks close to what you see on screen, but not exactly, because screens and garage lighting both change how color looks.

Use the tool to narrow it down to a blend or two. We bring flake samples to every floor estimate, so you can see the real chips in your garage light before the flake is ordered. The blend you pick doesn’t change the price.

No. We install flake floors; we don’t sell flake or coating by the bag.

Our crews work across Waukesha County and in Milwaukee, Jefferson, Walworth, and Racine counties. If you want the floor done, we’ll give you a free estimate. Our guide to garage floor coating cost explains what goes into the price.

Found a Blend You Like?Let’s Look at Your Concrete.

Free estimates, no pressure. We’ll come to you.